All fuses in the Dash panel fuse box are live on terminal 30 or 15, no dead ones & all relevant sockets are populated. Regards the electric window functionality on the door switches either side, all switch positions report correctly but the windows show no signs of life. The door locking via the remotes is operational. I've also unplugged the convenience module to see if that was pulling the bus down as per the A3 I had last week, but still no signs of life in the dash.
The engine cranks, fires & dies as per an immobiliser fault.
In Gateway I have no comm's with J285 Dash & Immobiliser.
In a full vehicle scan I get no comm's with J285 across the canbused control units.
If I press the left clocks button I get no wakeup on the dash, ignition on or off.
On pin 3 of the dash multiplug I have a 12V wake up signal from the Gateway.
Ignition turned on A/C etc fire up & I have comm's with all ECU's except dash / immo.
In Gateway I receive a coding error message that the dash & Immo are missing.
Comfort closing via remote & drivers door barrel is enabled in the coding but that doesn't work either.
However if I run an output test in the J385 & J386 door controllers I can lower & raise the windows using a scanner. But no other means of operating the windows is functional.
Message Thread
« Back to index | View thread »
Copyright © uk autotalk