Garage Support

Post a Response

Citroen Xsara Picasso 2.0 RFN 2006 - ABS traction control warning light, code P0606 #

Posted by John Jones on December 1, 2014, 5:05 pm

Year of Manufacture *: 25/03/2006
( Optional ) Engine Code or CC: 2.0 petrol RFN

Vehicle starts & drives no problems once normal operating temp is reached vehicle at idle in park hand brake applied ABS Traction control warning lights comes on ! Only Fault code in ABS ESP is P0606 Fault caused by another ecu loss comms engine ecu. Engine ECU tested by ATP @ Stafford no faults.The fault only occurs when stationary you can drive all day and its ok. has any one come across this ?

Re: Citroen Xsara Picasso

Posted by Kevin Apps <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT2589' width='330' height='300' border=0 style='border:none;'> on December 1, 2014, 6:04 pm, in reply to "Citroen Xsara Picasso "
Kevin Apps

John

Code read with what,A global code read with Lexia would most likely show more like a DATA A/B code.

Kev.

Re: Citroen Xsara Picasso

Posted by Mark Carter <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1428' width='330' height='300' border=0 style='border:none;'> on December 1, 2014, 10:35 pm, in reply to "Re: Citroen Xsara Picasso "
Mark Carter

As Kevin has said, start with a global scan and then move on with a scope.

Mark

Modern cars, Its all wizardry and witchcraft

Re: Citroen Xsara Picasso

Posted by john jones <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3194' width='330' height='300' border=0 style='border:none;'> on December 2, 2014, 9:21 am, in reply to "Re: Citroen Xsara Picasso "
John Jones

Thanks for the replies have used kts because its a Bosch system just got P0606 tried Verus same lexia carried out global only fault in ESP8 BOSCH just a description Remote fault permanent fault ecu. Remote fault permanent fault no communications with engine management ecu incorrect value received.
Fault caused by another ecu.This fault clears with ignition cycle and will only show when stationary
normal traffic light wait ok get towards 10 mins on come the ABS ESP lights.

Re: Citroen Xsara Picasso

Posted by Kevin Apps <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT2589' width='330' height='300' border=0 style='border:none;'> on December 2, 2014, 1:33 pm, in reply to "Re: Citroen Xsara Picasso "
Kevin Apps

John

I,m very surprised no DATA A/B code in the BSI with Lexia Are 100% sure on that ?

Time to get your scope out.

Kev.

Re: Citroen Xsara Picasso

Posted by john jones <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3194' width='330' height='300' border=0 style='border:none;'> on December 2, 2014, 5:08 pm, in reply to "Re: Citroen Xsara Picasso "
John Jones

just ran another global on lexia auto trans temporary fault can engine torque information no signal fault code 20. In the abs esp No comms with engine management network faults (shown in blue) must be dealt with from the bsi ecu family(ies) causing the fault electronic stability program (index 2)? Nothing standing out in the bsi apart from fault in abs

Re: Citroen Xsara Picasso

Posted by Mark Carter <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1428' width='330' height='300' border=0 style='border:none;'> on December 2, 2014, 6:35 pm, in reply to "Re: Citroen Xsara Picasso "
Mark Carter

Clear all codes and scope com lines from cold through until the fault happens?

Temperature issue ?

Modern cars, Its all wizardry and witchcraft

« Back to index

[ Garage Support ]