Make: Toyota
Model: Corrola
Year: 2012
Engine: 2ZR-FE
Mileage: 4860
Vin: JTNKU3JE70J001127
Model: ZRE182R-AHXDKQ
Customers complaint: srs light on
- - - - - - - - - - - - - - - - - -
Perform diagnostic scan.
Stored diagnostic trouble codes:-
B1613 front airbag sensor initialization error

This vehicle was in the panel shop for minor front end damage .

They replaced the RH front crash sensor as a precaution .

Since the the SRS check light is on with above DTC.

Do new sensors have to be initialized somehow before they work.
Or could this just he a scan tool issue (Hanatech)?

I have checked wiring to SRS ECU and I have moved the sensor to the left side, the fault moves with it.

Any help would be greatly received

Simon

>>> B1613 front airbag sensor initialization error

This vehicle was in the panel shop for minor front end damage .

They replaced the RH front crash sensor as a precaution .

Since the SRS check light is on with above DTC <<<

On the face of it I would say that the new part needs to be initialised.

Question: WHY was it replaced were any SRS components deployed? was the light on after the accident?

Do you have the old one to refit?

Mark

Hi

There was no deployment of airbags. The front sensor was replaced due to a crack in it. The old one was not available.

There is a method that Toyota state on TIS which shows how to erase using a flash method. This did not work either.

We are going to try with a main agent tool. I will let you know

Regards

Simon

Hi

This turned out to have the incorrect crash sensor supplied by the Toyota main agent.

Correct one fitted, code cleared.

Many thanks

Simon