Garage Support

Post a Response

Renault Scenic 1.6 16v 2007 - VVT test procedures #

Posted by Damian Daize on July 3, 2012, 7:17 pm

Year of Manufacture *: 2007
( Optional ) Engine Code or CC: 1.6 16v

Hi Guys

Can anyone point me in the right direction for finding out further info on the renault vvt system? Ideally the operational function, removal and install procedure, tooling etc and possibly why they seem to be troublesome!
Many Thanks

Damian

Re: Renault Scenic VVT Procedures

Posted by Kevin Apps <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT2589' width='330' height='300' border=0 style='border:none;'> on July 3, 2012, 8:29 pm, in reply to "Renault Scenic VVT Procedures"
Kevin Apps

Damian.

http://www.infotech.renault.com

Kev.

Re: Renault Scenic VVT Procedures

Posted by Alan Lange <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3293' width='330' height='300' border=0 style='border:none;'> on July 3, 2012, 9:32 pm, in reply to "Renault Scenic VVT Procedures"
Alan Lange

Hello Damian, these are oil controlled via a solonoid valve next to number 1 spark plug. Usual symptoms are a loud top end rattle on tick-over that goes with a little throttle. (The de-phaser pulley wears internally). Replacement is straight forward enough. I always lock the cams & mark the ring gear on these engines to be sure the crank pin goes in the right place, (remember there's no key-way on crank) Remove the de-phaser cap (large allen key from memory). A little oil will come out, then you can remove the pulley. When you fit the new one, turn it backwards & forwards until it locks in the set position. Hope this is of some help. Alan.

Re: Renault Scenic VVT Procedures

Posted by Damian Daize <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5217' width='330' height='300' border=0 style='border:none;'> on July 4, 2012, 9:17 am, in reply to "Re: Renault Scenic VVT Procedures"
Damian Daize

Cheers for your replies.

Re: Renault Scenic VVT Procedures

Posted by john nolan <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3226' width='330' height='300' border=0 style='border:none;'> on July 4, 2012, 9:29 pm, in reply to "Re: Renault Scenic VVT Procedures"
John Nolan

just to add i seen quite a few of these with cam sensor de-phaser fault codes. the problem is cured with a software update

« Back to index

[ Garage Support ]