Renault Megane II 1.9DCI 2006 - Engine relay location - Fixed #
Posted by Allan Davis on November 19, 2010, 7:51 pm
Year of Manufacture *: 2006
Hi Guys. I am in need of some information asap please. The above mentioned Megane came in for a service today. When starting the engine to fill the oil filter it cut out after a few seconds and an injector fault warning came up on the display. I tried to start if again and it cut out again and now it will not turn over on the button at all. The display now reads battery low even after replacing it with a new battery (fully charged).The orange spanner light and battery lights stay on with the ignition on.I cannot communicate with the instrument cluster or the engine ecu with either the modis or clip.Clip informs me that there is a network fault. I have checked the two 12v power feeds to the ecu and the one is ok but the other only reads 4v. When i apply 12v via my power probe the cluster lights up and the engine will crank for a short while off the button. I need to find the engine relay that supplies this power but i cannot find the information anywhere. I have Autodata cd3, Vivid and Tolerance.I am desperate to fix this car as i have had to let the owner use my own car until it,s repaired. Sorry for the long post but i thought it best to give as much info as possible. Thanks, Allan
Alan have you checked the 3 fuses on the battery terminal? Also wiring faults in loom as it runs in front of battery possibly disturbed whilst changing filter ?
Thanks for the replies. I have now diagnosed that the UCH is faulty and i have bought a new one from Renault.However i am having problems programming the key-cards to it. I have carried out the configuration but when it comes to the keys the message on screen gives me an immobilizer code and tells me to input it in the space below,however the code is 16 or 17 digits long and it Will only allow me it input 9 digits. Does anyone know how to do this with clip? I also have launch if thats better but i have not tried that yet.My tel. number is 01213282229 Thanks Allan
Hi the code you are getting is called the out code and it has to be changed to the 9 digit in code by the dealers system. The code changes every time the ignition is cycled so ignition must be left on while waiting for the in code. I think some codes can be got from chassis no also. You will need to be on very good terms with someone at renault. Or get someone with auto logic or ad100 to do it. I did a ford key today the car sat with the ignition on for an hour an a half while waiting on the official ford tech service to sell me an in code. it is a real pain to use, but at least you can get it legit.
on November 19, 2010, 8:07 pm, in reply to "