Year of Manufacture *: 2009
( Optional ) Engine Code or CC: 1.2cc
I first scanned the car with the new module and fault codes where
B0004:13RCM=Driver Knee Bolster Deployment Control
Failure Type13=Circuit open
B0072:13RCM=Pass Seatbelt Pretensioner Deployment Control
Failure Type13=Circuit open.
U2012:87RCM=Car Config Parameters
Failure Type87=Missing Message
I also notice that the vehicle Vin didn't match the car?
I thought these faults were false due to the new module not being programmed correct as I'm having problems not being able to update my IDS to the latest version for some reason, so i took the car along to another local garage with IDS they also tried with no luck saying that there is a Vin mismatch and it would need a new BCM and IPC to put it right, so picked the car up and drove it back to my workshop, i noticed now that i had the abs w/l on as well as the airbag flashing.
Decided to have another look at the airbag system rather tell them its got to go to the dealers, and it turned out that the faults where true, the driver knee airbag had been replaced with a 2nd hand unit but wasn't connected and the passenger seatbelt pretensioner also 2nd hand had a broken connector so this car definitely had accident history that the owner wasn't aware of!
After sorting out both wiring problems the airbag light now goes out as normal, the only trouble now is the abs w/l on with the fault code U2101=Control Module Config Incompatible. Ive tried re programming the ABS module but still no luck.
Any Help Appreciated.
Message Thread
« Back to index | View thread »
Copyright © uk autotalk