Is 0.45 ohms too much of a tolerance if trying to test an old unit when a new one was 9.3 ohms if its meant to be 2-8 ohms.
1.55 compared to the lowest spec of 2 is far more closer than 9.3 than it is to 8 ohms.
Must admit I wouldn't want to be condemning a pump at £555 based on the resistance measurement even though its out of spec. I'd be quite nervous to the pointi probably wouldn't replace it and suggest going to ford dealer asi can't be certain.
I've advised this before and some customers actually appreciate it even if your diagnosis was correct.
Please don't take this as a criticism as its not what I intended, its more a question of how are we meant to deal with this type of situation.
Message Thread | This response ↓
« Back to index | View thread »
Copyright © uk autotalk