"Repairs to CAN bus wiring can be carried out either with sections of repair wiring with the correct cross section or with entwined wires “green/yellow” or “white/yellow” from the electronic parts catalogue (ETKA)
When repairs are performed, both bus wires must have the same length.
When twisting the wires together, the length of each complete twist must be 20 mm.
There must not be any section of wiring, for example in the vicinity of crimp connectors, longer than 50 mm with the wires not twisted."
I sent you an email of the example repair to go with the script above.
Message Thread
« Back to index | View thread »
Copyright © uk autotalk