Garage Support

Back to Forum

Post a Response

Vauxhall Corsa D 1.3 2007 - Programming S/H BCM #

Posted by Gregory Cox on February 22, 2018, 8:55 pm

Year of Manufacture *: 2007
( Optional ) Engine Code or CC: 1300

Hi all is it possible to program a bcm from another
Car. With vauxcom.
Thanks.

Re: Vauxhall Corsa D programming s/h bcm

Posted by Mike fleet <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1641' width='330' height='300' border=0 style='border:none;'> on February 23, 2018, 9:45 am, in reply to "Vauxhall Corsa D programming s/h bcm"
Mike Fleet

Hi Greg,what is the problem with car.
Mike hometune

Re: Vauxhall Corsa D programming s/h bcm

Posted by Gregory cox <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5213' width='330' height='300' border=0 style='border:none;'> on February 23, 2018, 8:25 pm, in reply to "Re: Vauxhall Corsa D programming s/h bcm"
Gregory Cox

Hi Mike.this is a job I took on for another garage
The original ecu was water logged.so they bought
A s/h ecu which I programmd into the car with vaux
Com.car would not start after I programmed the ecu.
Came up with fault code p0090 rail pressurecontol valve low voltage.so I was thinking possible Bsm
I have now changed my mind I am now thinking wrong ecu as I have found out that there are two different engine codes.so I will check this on monday. Thanks Greg

Re: Vauxhall Corsa D programming s/h bcm

Posted by Mike fleet <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1641' width='330' height='300' border=0 style='border:none;'> on February 24, 2018, 11:09 am, in reply to "Re: Vauxhall Corsa D programming s/h bcm"
Mike Fleet

Hi Greg,what are u trying to program.origonal post was for bcm which is body control module.you have then said it's an ecu for engine.
Mike hometune.

Re: Vauxhall Corsa D programming s/h bcm

Posted by Gregory cox <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5213' width='330' height='300' border=0 style='border:none;'> on February 24, 2018, 5:01 pm, in reply to "Re: Vauxhall Corsa D programming s/h bcm"
Gregory Cox

Hi mike. Sorry to be misleading.i have now found the problem to be ecu.the garage bought s/h ecu which I programmed and found the car would not start no lights flashing.every thing looked good except the one fault code.which is in my previous
Post. I checked the old ecu and the nos are different from the one they bought s/h. I was going to program a used BCM.
Which I thought was the problem.and I now no that I can reset
A used one.
Thanks greg

Re: Vauxhall Corsa D programming s/h bcm

Posted by Lee Mackntosh <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1348' width='330' height='300' border=0 style='border:none;'> on February 25, 2018, 3:53 pm, in reply to "Re: Vauxhall Corsa D programming s/h bcm"
Lee Mackintosh

Sometimes but not always you can get away with it. Have you actually tried matching it to the immobiliser.

It may log a incorrectly coded ecm fault code but should still run unless it's an ecu fitted from a DTJ instead of a DTH which I believe are totally different. Don't quote me on that.

Think it's to do with boost pressure control and DPF fittment.

Re: Vauxhall Corsa D programming s/h bcm

Posted by Gregory cox <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5213' width='330' height='300' border=0 style='border:none;'> on March 7, 2018, 10:46 pm, in reply to "Re: Vauxhall Corsa D programming s/h bcm"
Gregory Cox

Hi sent the old ecu away for repair.
Thanks for your help.

« Back to index

[ Garage Support ]

Copyright © uk autotalk