Garage Support

Back to Forum

Post a Response

Daimler Double Six 5.3 1990 - Labour time for cam cover gasket #

Posted by Richard Endean on November 7, 2015, 9:52 am

Year of Manufacture *: 1990
( Optional ) Engine Code or CC: 5.3 Injection

We need to do the cam cover gaskets because they're leaking oil and fit a set of plugs. How long should I be quoting?

Re: Daimler Double Six labour times

Posted by andy pethig <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3731' width='330' height='300' border=0 style='border:none;'> on November 7, 2015, 10:13 am, in reply to "Daimler Double Six labour times"
Andrew Pethig

3.6 hrs says auto data

Re: Daimler Double Six labour times

Posted by Lee Mackintosh <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1348' width='330' height='300' border=0 style='border:none;'> on November 7, 2015, 10:23 am, in reply to "Re: Daimler Double Six labour times"
Lee Mackintosh

If its similar to an XJS then I'm fairly confident that the a/c pump needs lifting up to remove 1 of the spark plugs as its directly underneath.

Also the plugs can be very tight if they haven't been replaced for a long time.

Re: Daimler Double Six labour times

Posted by Peter Mutlow <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1569' width='330' height='300' border=0 style='border:none;'> on November 8, 2015, 4:02 am, in reply to "Re: Daimler Double Six labour times"
Peter Mutlow

Took me about an hour to find the plugs underneath all the fuel injection system on an XJS V12 last time I did one many years ago. Never did another. Was always too busy or quoted astronomical charges to scare them away. :-)

Regards

Pete M

Re: Daimler Double Six labour times

Posted by ian slattery <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1196' width='330' height='300' border=0 style='border:none;'> on November 8, 2015, 6:27 pm, in reply to "Re: Daimler Double Six labour times"

Hi Richard

There is a special socket for the front 2 plugs jag1364. you can weld a 3/8 drive to a 5/8 socket.

Once loose use a old plug lead end on a valve grinding stick to remove the rest of the way and restart.

But it is no big deal to move the air con pump out of the way

Regards Ian.

Re: Daimler Double Six labour times

Posted by andyhyoung <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5148' width='330' height='300' border=0 style='border:none;'> on November 8, 2015, 6:57 pm, in reply to "Re: Daimler Double Six labour times"
Andrew Young

I have that special jag plug socket,but tbh,it is a waste of time if the plugs have not been out for a while.Just lift the ac pump.Much easier,as you may find the front plugs cross-threaded anyway.

« Back to index

[ Garage Support ]

Copyright © uk autotalk