Garage Support

Post a Response

Ford Transit Custom 2.2 2013 - Non starter #

Posted by Paul Baldwin on July 7, 2015, 10:30 pm

Year of Manufacture *: 2013
( Optional ) Engine Code or CC: 2200

Non starter.

Van had crash drivers airbag gone off. Can't find inertia fuel cut off switch. No comms with engine and airbag. Also 120 ohm resistance at one port on CAN lines.

Wiring not hit in accident.

Any ideas folks

Re: Ford Transit Custom 2.2 2013 - Non starter #

Posted by Tony Ludford <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5539' width='330' height='300' border=0 style='border:none;'> on July 8, 2015, 7:37 pm, in reply to "Ford Transit Custom 2.2 2013 - Non starter #"
Tony Ludford

Should the engine turn off after a crash,
you may restart the engine by doing the
following:
1. Switch the ignition off.
2. Switch the ignition to position III.
3. Switch the ignition off.
4. Switch the ignition on again to
re-enable the fuel pump.

From here: http://www.fordservicecontent.com/pubs/content/~WODTTR/~MGB~LEN/pdf/GBEN13TTRog1e.pdf

« Back to index

[ Garage Support ]