Garage Support

Post a Response

Vauxhall Tigra Z14XEP 2006 Sport - Electric window faults - Fixed #

Posted by Mike Burgess on February 13, 2014, 9:18 pm

Year of Manufacture *: 2006
( Optional ) Engine Code or CC: Z14XEP

Hi I have a problem with the front windows on this tigra. The vehicle came in with the hard top not working or boot. There was also a lot of water in the near side foot well, this was coming from inner bulk head BCM and relay covers. We have now managed to get the roof working but I now find that the windows go to far up to shut the doors and will not open or close slightly when operating inner or outer handles.

Re: Vauxhall tigra sport window faults

Posted by Andy Evans <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5518' width='330' height='300' border=0 style='border:none;'> on February 13, 2014, 9:38 pm, in reply to "Vauxhall tigra sport window faults"
Andrew Evans

There is a re-set procedure within Tech2 for this, did one last week that had a new window reg.

Re: Vauxhall tigra sport window faults

Posted by Mike burgess <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3060' width='330' height='300' border=0 style='border:none;'> on February 13, 2014, 10:04 pm, in reply to "Re: Vauxhall tigra sport window faults"
Michael Burgess

I have tried it with Bosch KTS and Snap on diagnostic scanners but no luck.

Re: Vauxhall tigra sport window faults

Posted by Andy Evans <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5518' width='330' height='300' border=0 style='border:none;'> on February 14, 2014, 7:28 am, in reply to "Re: Vauxhall tigra sport window faults"
Andrew Evans

Its done within the hard top controller

Fixed #

Posted by Mike Burgess on February 14, 2014, 9:49 pm, in reply to "Re: Vauxhall tigra sport window faults"
Edited by board administrator February 19, 2014, 12:06 pm

An up date to this problem. I arranged a couple of days ago for Diagnostic tec guy to come and have a look. He tried the usual reset but still a fault. He then found a different way of resetting the system were he had to remove certain fuses in a set routine with Tec 2, and after a little wile the system was reset. We think that due to various faults and disconnection of relays etc, the system was all out sequence. Thanks for all help job now FIXED.

« Back to index

[ Garage Support ]