Garage Support

Back to Forum

Post a Response

Peugeot Partner 1.9 1999 - No speedo - Fixed #

Posted by Shane Gray on December 10, 2012, 11:10 am

Year of Manufacture *: 1999
( Optional ) Engine Code or CC: 1.9

Hi,
I have a Peugeot partner in at the moment with the speedo not working. I have scoped at the sensor and i,m getting no signal. The drive inside box is turning.
I fitted new sensor and still inop.
It is a 3 wire sensor so it should be 1 power 2 earth and 3 signal. I have power and earth .
Any ideas?
Shane

Re: Peugeot/Partner-No speedo

Posted by chris Angus <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5111' width='330' height='300' border=0 style='border:none;'> on December 10, 2012, 7:19 pm, in reply to "Peugeot/Partner-No speedo"

Shane, have yo got a wiring diagram for this model? If you post the Engine code and hp I can have a look for you.

As far as I know the signal is shared by the body module and engine ecu, (dependant on specific model) and being hall effect you should have a supply voltage on the signal line when disconnected. You will probably need to confirm wiring integrity to both units, I suspect the engine ecu will supply the reference voltage but either module could be pulling it down, or shorted wiring.

Test the wiring and disconnect each module and see what you get.

Chris

Re: Peugeot/Partner-No speedo

Posted by SHANE GRAY <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3442' width='330' height='300' border=0 style='border:none;'> on December 11, 2012, 8:44 am, in reply to "Re: Peugeot/Partner-No speedo"

Hi Chris,
Your right i forgot about refernce voltage (5V).
I have checked this morning and there is nothing on signal wire.
The engine is 1.9D WJZ DW8/L3 70hp bosch system.
I have no wiring diagrams for this as AutoData has no info. Can you also tell me location of ECU and BCM.
Thankyou Shane.

Re: Peugeot/Partner-No speedo

Posted by Chris Angus <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5111' width='330' height='300' border=0 style='border:none;'> on December 11, 2012, 9:52 am, in reply to "Re: Peugeot/Partner-No speedo"

Shane, have you got full vin?

Re: Peugeot/Partner-No speedo

Posted by SHANE GRAY <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3442' width='330' height='300' border=0 style='border:none;'> on December 11, 2012, 3:18 pm, in reply to "Re: Peugeot/Partner-No speedo"

Hi Chris,
Its VF35BWJZT60227936
SHANE

Re: Peugeot/Partner-No speedo

Posted by Chris Angus <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5111' width='330' height='300' border=0 style='border:none;'> on December 11, 2012, 3:53 pm, in reply to "Re: Peugeot/Partner-No speedo"

Give me a call shane, will be easier to explain
07930323915
Chris

Re: Peugeot/Partner-No speedo

Posted by SHANE GRAY <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3442' width='330' height='300' border=0 style='border:none;'> on December 12, 2012, 5:14 pm, in reply to "Re: Peugeot/Partner-No speedo"

Hi again,
Thanks chris for all your info.
I tested all wiring from sensor to instrument cluster for resistances and shorting and tested at back of cluster for reference voltage with no joy.
I have ordered second hand cluster let you no of outcome.
Cheers Shane

Fixed #

Posted by Shane Gray on December 16, 2012, 10:54 am, in reply to "Re: Peugeot/Partner-No speedo"
Message modified by board administrator December 19, 2012, 11:53 am

Hi again,
Fitted secondhand cluster yesterday and now speedo works.
Thanks Chris
Shane

« Back to index

[ Garage Support ]

Copyright © uk autotalk