Garage Support

Post a Response

Peugeot 407 3.0 V6 2005 - Driver seat heating not working #

Posted by stuart skinner on July 29, 2012, 12:35 am

Year of Manufacture *: 2005
( Optional ) Engine Code or CC: 3.0 lt v6 series two engine

Hi

I have a mate hes bought a peugeot 407 v6 sport.its got full leather seats and heated.im in australia and the car came from queensland where its hot all the time. The drivers seat is not heating up but the passengers does.is there any set up in the bsi that i can turn it on by the scanner. I have looked under the seat and all the plugs seem on,but its very busy under there.

Has any body got a wiring diagram for the seat, I cant get any help from the dealer here

Cheers Stuart

Re: 407 heated seat inop

Posted by andyhyoung <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5148' width='330' height='300' border=0 style='border:none;'> on July 29, 2012, 6:41 pm, in reply to "407 heated seat inop"
Andrew Young

Realistically you are going to need to lift the seat to check the power/earth supplies.Not specific to this car,but most heated seat failures I have encountered are very often due to broken heating elements,usually 2,one in the cushion and one in the backrest and connected in series.So if one fails ,it knocks out the other.Also msny systems have a thermostatic switch embedded in the cushion "blanket".

Re: 407 heated seat inop

Posted by stuart skinner <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5562' width='330' height='300' border=0 style='border:none;'> on July 30, 2012, 3:39 am, in reply to "Re: 407 heated seat inop"

thanks for advice,ill keep checking,might be trim off time to get to heated elements im thinking.

« Back to index

[ Garage Support ]