Garage Support

Post a Response

Nissan Micra 1.2 2003 - How to bleed the clutch? - Fixed #

Posted by Mike burgess on July 22, 2012, 9:19 am

Year of Manufacture *: 2003
( Optional ) Engine Code or CC: 1.2

Hi

We have just replaced the clutch assembly on an 03 Nissan Micra due to the concentric slave cylinder leaking and pedal on the floor. I noticed on the slave cylinder there is a bleed nipple that is fixed, how do we bleed the system.

Many thanks

Mike

Re: Nissan micra how to bleed the clutch

Posted by Ian Slattery <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1196' width='330' height='300' border=0 style='border:none;'> on July 22, 2012, 9:37 am, in reply to "Nissan micra how to bleed the clutch"

Hi Mike.

Does the feed pipe have two positions, Not in all the way for bleeding then fully in when bleed. I have seen this a few times but not sure on the vehicles.

Regards Ian.

Re: Nissan micra how to bleed the clutch

Posted by Kevin Apps <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT2589' width='330' height='300' border=0 style='border:none;'> on July 22, 2012, 9:48 am, in reply to "Nissan micra how to bleed the clutch"
Kevin Apps

Mike.

Look for the lock pin on the bleed connector, lift pin one click (not remove) and slide the connector about 5mm, and bleed.

Kev.

Re: Nissan micra how to bleed the clutch

Posted by Mike burgess <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3060' width='330' height='300' border=0 style='border:none;'> on July 22, 2012, 5:37 pm, in reply to "Re: Nissan micra how to bleed the clutch"
Michael Burgess

Many thanks for that I will check it out in the morning and report back.

Fixed #

Posted by Mike Burgess on July 25, 2012, 6:59 am, in reply to "Re: Nissan micra how to bleed the clutch"
Message modified by board administrator July 26, 2012, 3:08 pm

Many thanks for that information, the system bleed out with no problems. FIXXED.

« Back to index

[ Garage Support ]