Garage Support

Post a Response

Ford Ranger 2.5 TDDi 2008 - Remote key fob sync procedure - Fixed #

Posted by John Ogilvie on March 19, 2012, 8:39 am

Year of Manufacture *: 2008
( Optional ) Engine Code or CC: WL-C

Hi all
Any body know the correct key fob sync procedure,for the above 2008 model.
Have tried the ignition on/off 8 time procedure, But it will not enter programming mode.
This has the 2 button rectangular remote.
Thanks John

Re: Ford Ranger 2.5 tddi (remote key fob sync procedure)

Posted by Matt Booth <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3028' width='330' height='300' border=0 style='border:none;'> on March 19, 2012, 8:38 pm, in reply to "Ford Ranger 2.5 tddi (remote key fob sync procedure)"
Matthew Booth

Try this...

Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the driver’s door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the driver’s door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1 twice. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) twice. Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done!

Re: Ford Ranger 2.5 tddi (remote key fob sync procedure)

Posted by george ambelas <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3245' width='330' height='300' border=0 style='border:none;'> on March 19, 2012, 9:53 pm, in reply to "Re: Ford Ranger 2.5 tddi (remote key fob sync procedure)"
George Ambelas

hi mat does this procedure apply to any other fords?

Re: Ford Ranger 2.5 tddi (remote key fob sync procedure)

Posted by John Ogilvie <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5297' width='330' height='300' border=0 style='border:none;'> on March 20, 2012, 7:34 am, in reply to "Re: Ford Ranger 2.5 tddi (remote key fob sync procedure)"

Thanks Matt
Will give it a try later and let you know.

Regards
John

Fixed #

Posted by John Ogilvie on March 20, 2012, 6:57 pm, in reply to "Re: Ford Ranger 2.5 tddi (remote key fob sync procedure)"
Message modified by board administrator March 24, 2012, 1:31 pm

Cheers Matt you were spot on, Worked a treat first time.
Thanks Again
John

Re: Ford Ranger 2.5 tddi (remote key fob sync procedure)

Posted by Matt Booth <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3028' width='330' height='300' border=0 style='border:none;'> on March 20, 2012, 11:10 pm, in reply to "Re: Ford Ranger 2.5 tddi (remote key fob sync procedure)"
Matthew Booth

I don't think so, just the late Ranger.

Matt

« Back to index

[ Garage Support ]