Garage Support

Post a Response

Mercedes Benz E220 2.2 CDi 2003 - Service brake warning on #

Posted by George Ambelas on February 15, 2012, 10:03 pm

Year of Manufacture *: 2003
( Optional ) Engine Code or CC: 2.2 cdi

hi everyone i have just changed the front pads
and discs on this merc and when i pressed the
pedal to build the pressure up the sdc unit
began to prime it self,and a red warning showed
on the display,now it's gone but a service brake
visit workshop warning is on. does anybody know how i can get rid of it?
thanks
george

Re: Mercedes E220 service brake warning on

Posted by Lee Mackintsoh <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1348' width='330' height='300' border=0 style='border:none;'> on February 15, 2012, 10:09 pm, in reply to "Mercedes E220 service brake warning on "
Lee Mackintosh

I think you need to deactivate and reactivate this system when changing brake pads on these models.

Its a simple process with the snap-on scanner as i done one last Friday.

Just make sure the battery is charged and nothing is in the way of the brake calipers (especially fingers) when reactivating the system.

Re: Mercedes E220 service brake warning on

Posted by Matt Booth <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3028' width='330' height='300' border=0 style='border:none;'> on February 15, 2012, 10:13 pm, in reply to "Re: Mercedes E220 service brake warning on "
Matthew Booth

You're correct Lee. You should depressurise the system as you run the risk of the pistons coming out when you take the caliper off. You've probably just upset it but both snap on and Bosch have the option for SBC brake service.

Matt

Re: Mercedes E220 service brake warning on

Posted by george ambelas <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3245' width='330' height='300' border=0 style='border:none;'> on February 16, 2012, 12:36 pm, in reply to "Re: Mercedes E220 service brake warning on "
George Ambelas

Hi all this one is fixed now i used my opus to
read the sbc and there were 3 faults there once
i cleared them the service brake message went
i think there is a procedure to follow when changing brake pads on these which can be done
without the use of a scanner
does anybody know it?
george

« Back to index

[ Garage Support ]