Garage Support

Back to Forum

Post a Response

Ford Focus 1.8D 1999 - Diesel pump re-program #

Posted by Mike Fleet on December 18, 2011, 11:48 am

Year of Manufacture *: 99
( Optional ) Engine Code or CC: 1.8d

Hi all

I need to program a second hand pump to Ford Focus, can someone direct me to the correct procedure using DEC superscan

Mike Fleet

Hometune

Re: program ford diesel pump

Posted by Mark Carter <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1428' width='330' height='300' border=0 style='border:none;'> on December 18, 2011, 5:10 pm, in reply to "program ford diesel pump"
Mark Carter

DEC should tell you how to do it within the program. There are help/Info files within the special functions.

Mark

Modern cars, Its all wizardry and witchcraft

Re: program ford diesel pump

Posted by keith brown <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1429' width='330' height='300' border=0 style='border:none;'> on December 19, 2011, 9:23 am, in reply to "Re: program ford diesel pump"

hi mike connect dec up & run through proceedure,it will give u a code!,register & log on to www.autokeyprog.com , its free,enter the code you were given by dec,it will then produce an in code for you to input,you must leave scanner connected & ign on during the prceedure,sometimes it dosnt work first time,if it fails you need to start from scratch because its a rolling code & will be different each time you enter system hth keith

Re: program ford diesel pump

Posted by lee mackintosh <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1348' width='330' height='300' border=0 style='border:none;'> on December 19, 2011, 11:08 am, in reply to "Re: program ford diesel pump"
Lee Mackintosh

I'd think it would be timed access if its from a similar year car.

Never done it with any other scantool other than ford WDS, very simple to do as it guides you through it.

Re: program ford diesel pump

Posted by mark Carter <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1428' width='330' height='300' border=0 style='border:none;'> on December 19, 2011, 11:56 am, in reply to "Re: program ford diesel pump"
Mark Carter

For what its worth I agree with Lee, is it not too early for coded access?

I'm guessing The pump is a VP30/VP44 and if so KTS (with an adapter)will do it if you have access to one.

Modern cars, Its all wizardry and witchcraft

Re: program ford diesel pump

Posted by Lee Mackintosh <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1348' width='330' height='300' border=0 style='border:none;'> on December 19, 2011, 2:39 pm, in reply to "Re: program ford diesel pump"
Lee Mackintosh

I think Snap-on scanner is supposed to do these as well but have read that (not sure if its a fact) it will fail if its a coded access system without warning you.

« Back to index

[ Garage Support ]

Copyright © uk autotalk