Garage Support

Post a Response

Renault Scenic II 1.9 DCi 2004 - Vibrating drive belt #

Posted by Gerry Leech on November 15, 2011, 6:30 pm

Year of Manufacture *: 2004
( Optional ) Engine Code or CC: 1.9 dci

Hi

Has anybody come across a scenic with a vibrating drive belt, on acceleration from 950rpm to around 1000rpm ,quickly on and off the throttle,the tensioner vibrates and produces a drumming noise.
I have changed the belt and tensioner and its better
but I think it is not cured yet. Could return!.It does not have a free wheeling alternator pulley and the crankshaft pulley has been replaced about a year ago and it is OK.
Any thoughts anyone please.
Gerry

Re: Renault Scenic 2

Posted by Kevin Apps <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT2589' width='330' height='300' border=0 style='border:none;'> on November 15, 2011, 7:45 pm, in reply to "Renault Scenic 2"
Kevin Apps

Gerry

"It does not have a free wheeling alternator pulley" perhaps it should, have you checked ?

Kev.

Re: Renault Scenic 2

Posted by gerry leech <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3016' width='330' height='300' border=0 style='border:none;'> on November 15, 2011, 8:57 pm, in reply to "Re: Renault Scenic 2"
Gerry Leech

Hi Kevin, Is there a modification or recall on these
scenics.
Gerry

Re: Renault Scenic 2

Gerry
I would not know from the limited info. supplied, i just think it should a one way drive.
With more info i could check, but far easier to check with your freindly local dealer.
Kev.

Re: Renault Scenic 2

Posted by Tony Sefton <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5581' width='330' height='300' border=0 style='border:none;'> on November 15, 2011, 10:07 pm, in reply to "Re: Renault Scenic 2"
Tony Sefton

Most renaults have a rubber damped alternator pulley, but there are lots of options of pulleys available, ( Clutch, non clutch or solid ) some companies are selling solid cast alloy pulleys as an alternative but i think that they can cause problems, For some models, Renault supply a belt and pulley kit with an alternator pulley, alternator belt and a tensioner at a very reasonable price, If its available for your model, Then I would think that its a good option to replace the full kit and hopefully cure the fault first time.

H.T.H Tony.

Re: Renault Scenic 2

Posted by gerry leech <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat3016' width='330' height='300' border=0 style='border:none;'> on November 15, 2011, 11:09 pm, in reply to "Re: Renault Scenic 2"
Gerry Leech

I will have a word with Renault about this tomorrow
ie; tech bulletins, to see if its the solid alternator pulley thats causing the probs.
Thanks for the advice.
Gerry.

Re: Renault Scenic 2

Posted by Glen Strachan <iframe src='https://members4.boardhost.com/ukautotalk/info/user=ukat1463' width='330' height='300' border=0 style='border:none;'> on November 16, 2011, 5:08 pm, in reply to "Re: Renault Scenic 2"
Glen Strachan

I would go with the alternator pulley . We change loads for exactly that reason

« Back to index

[ Garage Support ]