Garage Support

Post a Response

Iveco 3.0 2006 - Wiring diagram for engine management required #

Posted by Lee Pritchard on July 5, 2011, 11:37 am

Year of Manufacture *: 2066
( Optional ) Engine Code or CC: 3.0

Hello all,

Im after advice on where to get wiring engine management diagrams for an iveco 3.0 2006.The owner (our local snap on van)says when it doesnt start there is no feed to the pump,so before i start tracing wiring etc i thought i would get the wiring diagram.

Thanks for any advice

Lee

Re: Iveco 3.0

Posted by aidan birley <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT2879' width='330' height='300' border=0 style='border:none;'> on July 5, 2011, 1:31 pm, in reply to "Iveco 3.0"
Aidan Birley

hi

I may be able to help with a diagram but need more information please ! model & engine code

do you mean power supply to low pressure pump ?

There is also an iveco tech help line which I can find the number for.

cheers aidan

Re: Iveco 3.0

Posted by chris hogan <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT2876' width='330' height='300' border=0 style='border:none;'> on July 5, 2011, 2:38 pm, in reply to "Iveco 3.0"
Christopher Hogan

try here

http://www.epcatalogs.com/ivdaily.html

Re: Iveco 3.0

Posted by Lee Pritchard <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1074' width='330' height='300' border=0 style='border:none;'> on July 6, 2011, 10:15 am, in reply to "Re: Iveco 3.0"
Lee Pritchard

Hello all,

Thanks for your response,i had a play with this yesterday evening before finishing.

Decided to start with the basics,fuses etc,all ok,no feed to the pump on the chassis,scoped cam sensor no signal nor supply to the hallefect sensor,removed ecu multiplug found to be contaminated with water and pins broken.

Vehicle is being recovered to iveco due to having an ecu about 8months ago.

Thanks for your responses,the link was useful regarding the iveco wiring diagrams.

Regards lee

Re: Iveco 3.0

Posted by ian(n) <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5546' width='330' height='300' border=0 style='border:none;'> on July 8, 2011, 7:26 am, in reply to "Re: Iveco 3.0"
Ian Nicholas

Hi Lee, just doing one of these...watter gets into loom straight from coolant reservoir switch! runs through to ecm/pins etc.What a load of......... it'll need a loom as well probably.
cheers ian(n)

Re: Iveco 3.0

Posted by lee pritchard <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT1074' width='330' height='300' border=0 style='border:none;'> on July 8, 2011, 12:44 pm, in reply to "Re: Iveco 3.0"
Lee Pritchard

Hi ian,

yes apparently this has had a modified sensor,it had a new ecu 9 months ago from iveco so gone back there,he rang them regarding the fault happening again he didn't get much of a response off them,interesting to see if they will cover the whole costs with warranty.
lee

« Back to index

[ Garage Support ]