Garage Support

Post a Response

Mercedes Benz Sprinter 308d 2.3 - Which timing belt locking kit? - Fixed #

Posted by Martin Bebb on September 19, 2010, 2:58 pm

Year of Manufacture *: 2000
( Optional ) Engine Code or CC: 2300

I have a Merc Spinter Van in which needs timing. I have been locking on the net for a timing tool kit. Can someone please tell me what tools i need and where i can buy them. Autodata do give me the proceedure and at some stage i have to lock cogs into place but not what tools to use.

Re: Mercedes sprinter 308d

Posted by Aidan Birley on September 19, 2010, 9:24 pm, in reply to "Mercedes sprinter 308d"
Message modified by board administrator September 20, 2010, 2:15 pm

Martin

have a look at this link

The PDF link for instructions, include list of models covered, you will need to check that for your application

cam kit

Re: Mercedes sprinter 308d

Posted by Kevin Gundry on September 20, 2010, 10:37 am, in reply to "Re: Mercedes sprinter 308d"
Message modified by board administrator September 20, 2010, 2:14 pm

Hi Mark,

Is this a 308d or 308cdi one uses pins one does not?

kev gundry

Re: Mercedes sprinter 308d

Posted by Martin Bebb on September 20, 2010, 11:06 am, in reply to "Re: Mercedes sprinter 308d"
Message modified by board administrator September 20, 2010, 2:14 pm

it is the 308d

Re: Mercedes sprinter 308d

Posted by Kev Gundry <iframe src='https://members4.boardhost.com/ukautotalk/info/user=UKAT5245' width='330' height='300' border=0 style='border:none;'> on September 20, 2010, 1:29 pm, in reply to "Re: Mercedes sprinter 308d"
Kevin Gundry

hi Martin,

the tool you need is: A601 589 05 21 00 there about £12 from Mercedes. Time engine up to 15deg atdc unscrew plug on the side of the pump insert tool this will then lock the pump you might have to move back and forth slightly in order to engage.

HTH

Kev G

Fixed #

Posted by Martin Bebb on October 17, 2010, 1:11 pm, in reply to "Mercedes Benz Sprinter 308d 2.3 - Which timing belt locking kit? #"
Message modified by board administrator October 18, 2010, 2:43 pm

Thanks for the help. Fixed it. Left me with a happy customer.

« Back to index

[ Garage Support ]