Posted by Keith Simpson on May 7, 2010, 7:43 am, in reply to "suzuki jimny key fob"
1/ Sit in car close all doors, and key out of the ignition.
2/ Open the driver’s door. Insert the key and turn the ignition switch to “ON”
3/ Turn the ignition switch to “OFF” within 10 seconds.
4/ Push and release the driver’s door switch 3 times within 20 seconds.
5/ Turn the ignition switch to “ON” position within 10 seconds.
6/ Turn the ignition switch to “OFF” position within 10 seconds.
7/ Press and hold both “LOCK” and “UNLOCK” buttons on the remote for more than 5 seconds within 20 seconds (after step 6). All the doors will lock/unlock to confirm that this process has been done correctly.
8/ Press “LOCK” or “UNLOCK” buttons on the remote within 5 seconds (after step 7). All the doors will lock/unlock to confirm that this process has been Done correctly. With this process, the remote is now programmed.
9/ If you want to program the additional remotes, repeat the procedure from Step 1) to Step 8).