Re: Rover 218 SD 1994 - Immobiliser / alarm unreliable # Archived Message
Posted by Shaun Dale on March 5, 2010, 9:21 pm, in reply to "Re: Rover 218 SD 1994 - Immobiliser / alarm unreliable #"
Hi Steve, From memory the 3TX fobs are about £60 from rover or £40 from land rover (part number YWX101220, I'm pretty sure, how sad am I?). Lots of machines will do it, I use my ACR4 and only takes seconds, no pin required. The only problem you may have is it may not have a 16 pin socket. If this is the case call or PM me and I will talk you through it. As Pete says secondhand fobs are plentiful but always inspect with a good magnifier as they will be full of dry joints, upside is they will almost always go again after you have been over them with a soldering iron. Other possibility is whip out the 5AS and hardwire the stop sol to the ignition, assuming it has got no security module on the pump. HTH Shaun.
|
|