[Select] [02 - Transmission] [Adaptation - 10] Channel 000 [Read] [Save] [Done, Go Back] [Measuring Blocks - 08] Block 010 (in 1st Row) Block 011 (in 2nd Row) [Go!] Check fields 2, specification is ADP OK.
Move the selector lever in position D and drive with partial load 20 m / 70 ft forward, then brake to standstill. Hold the brake for 10 seconds. Move the selector lever in position R and drive with partial load 20 m / 70 ft reverse, then brake to standstill. Hold the brake for 10 seconds. The procedure needs to be repeated at least 5 times and can be repeated up to 10 times until the measuring values show ADP OK. [Done, Go Back] [Close Controller, Go Back - 06]