Just done head gasket on this one. Fan does cut in at 102c, but at its slowest speed
Pull wire off CTS, fan does not run(normally does)
Switch on air con, fan does not run(normally does)
Fault code P 0480.. Fan 1 open cicuit..this does clear until fan runs slowly again. Also fan will not run in an actuator test.
Fitted a complete new fan motor housing which includes converter (£282+vat Ouch!)
Continuity between pin 67 and converter.
Sent ECU away for test..O.K
Not sure where to go next, any thoughts.
Russell