Year of Manufacture *: 2006
( Optional ) Engine Code or CC: EJ25
This is going to be re-bored with 0,50 over size OE pistons and the only spec I can find appears to be too small at 0.010-0.030mm which is 4 tenths of a thou up to 1.2 thou, which from memory is wrong (rule of thumb is one thou per inch of bore)I know these are short skirted pistons that will affect the clearance but it just seems too tight.
Can anybody shed any light on this?
Mark
Message Thread
« Back to index | View thread »
Copyright © uk autotalk