The Forward Forum
[ Post a Response | The Forward Forum ]
Re: Dome Light Wire Routing
Alternatively, I took a long piece of piano wire and taped the dome light wire to one end. I fished it from the hole in the bottom curve/cheek of the a-pillar to the top. Once I did this, I had to fish it from the same hole forward to the dashboard area.
It is very tricky trying to fish that wire.....the easiest way is to get a little pom-pom, or a cotton ball and tie a string to it. Then use compressed air to blow it down from the top of the a pillar, past the hole in the window frame near the light switch, and grab the string with a hook or needlenose pliers. good luck, and repeat over and over goooooosfaber, goooooooosfaaber.
its up the driver side a pillor and around the cab in the upper section to the light. hooks to the light switch
My truck didnít have the dome light wire in it. So can someone tell me what the proper routing would be? Is it up the outside of the A-pillar and over the door. Or is it under the door? Unfortunately I donít see the obvious way to run it so it is hidden.
Thanks guys -