Posted by go_ta 460 ci Mark 5 BBC, short block, unassembled project changed directions and 4 bolt main block has been magnaflux, sonic, fresh machine work, NOT RAN Elgin forged 4340 4.0" stroke crank (65 lbs) fresh machine work, NOT RAN 8:1 (119cc) or 9.5:1 (100cc) Speed Pro / TRW rods NEW - includes rings, crank + rod bearings, $2000 + ride (4K+ value) thanks.
on August 20, 2009, 1:59 pm
Message modified by user go_ta September 11, 2009, 9:21 pm
fresh from the machine shop / in fact it's still there.
mid level 1000+ HP low 8:1 or 9.5:1 compression
for supercharger or tubro set-up or mild N/A street.
this build was never completed.
bored .030, honed, decked and o-ringed,
ARP main studs (yes, line bore+hone mains),
deck height is 9.749
is fresh .010/.010, magnaflux, cross drilled
and chamfer
forged pistons (blower / turbo) ZL2453F30,
spiro locks, and pins assembled on
Eagle 6.135 H-beam with ARP 8740 rod bolts
.011 below deck, -6cc dish, .030+
pistons NEW
cam bearings (installed), 1 piece adapter
with seal, arp oil pump stud and drive,
and cam button (why not)
190
Responses